| All of our Welcome Collection doors come fitted with: |
|
Click image for more detailed construction information. |
» 2 hook and 3 deadbolt white wrap around lock PAS 23/24 Certification and Police preferred security specification.
» 45mm back set
» White powder coated Aluminium wrap around faceplate to two sides
» Adjustable top, bottom and centre keep system Lever-lever or lever-pad function (optional)
»3x 3 way adjustable hinge meets requirement of BS EN 1670:1998.
|
Door Leaf
Fibreglass (GRP Thermoset) through colour door facings nominal 2mm thickness with grained effect surface • No finishing required • Low maintenance: wipe down with soft cloth and warm water to clean • 44mm Thickness • Supplied fully finished with hardware and glazing pre-fitted (except handles supplied only) • High Density closed cell rigid polyurethane foam that is ODP ZERO. |
| |
Glazing
Through colour click fit glazing system with grained effect. Pre-finished to match door • Pre-glazed with 26mm thickness double-glazed • Glazed units incorporate toughened or laminate glass to BS6206 (Low E glass may be supplied but not required for compliance with Part L1 of the building regulations for England & Wales). |
| |
PVC Outer Frame
Offered in 70mm thickness • 70mm profile fitted with 1 bubble gasket and two brush seals (triple seal) • Supplied as welded goal post frame with 150 cill attached as standard other options available • Steel reinforced PVCu outer-frame • PVCu Highly UV stabilised BS1006 1978 • High impact resistant • Profile tested to BS476 Part 7 1971 have achieved a class 2 minimum surface spread of flame rating • Low coefficient of thermal conductivity has insulation properties of 0.035 W/M c three times better insulation than a timber alternative • High Impact resistance. |
| |
Lock and Hinge
White wrap around lock PAS 23/24 Certification and Police preferred security specification • 45mm back set • White powder coated aluminium wrap around faceplate to two edges • Adjustable top, bottom and centre keep system • Lever-lever or lever-pad function (optional) • 3D Challenger butt hinge x 3 allows for lateral +2mm –2mm, height +3mm and compression –0.75mm +0.75mm adjustment while the door is closed • Meets requirement of BS EN 1670:1998 • High security pin and locking screw • Other lock specifications available on request. |
| |
Threshold / Weather Bar
Low 14.5mm threshold PAS 23/24 certified • Part M compliant options available • 150 cill fitted as standard. To view threshold images and technical information click here.
|
